Showcasing Janome Memory Craft 550e...

Interesting Features about Janome MC550E

180 Built-in Designs and 6 Fonts for Monogram		Maximum Embroidery Area 201mm x 361mm The biggest embroidery area for Janome Machines!
4 Embroidery Hoops Included With four standard hoops included (RE36b: 7.9” x 14”, SQ20b: 7.9” x 7.9”, RE20b: 5.5” x 7.9”, SQ14b: 5.5” x 5.5”) and four optional hoops available (RE28b: 7.9” x 11”, RE10b: 1.5” x 5.5”, Hat Hoop HH10b: 1.5”x 3.5” and the AcuFil hoop ASQ18b: 7.2” x 7.2”), you will have all of your embroidery needs covered.		Redesigned Hoop Clamps Hooping your large embroidery projects just became easier with newly redesigned hoop clamps on the included RE36b hoop. Created with two settings, you can insert the inner hoop and set the clamp at a half-way point, enabling you to make sure your fabric is in the correct position. Then easily press the two clamps all the way into place to completely stabilize your fabric.
Built in Sashiko/ Wedding Designs and Programmable Jump Thread Trimming Depending upon the type of embroidery you are doing, you may not always want the jump threads to be cut in between sections. Or, you may decide that you want more or less space in between thread trims. The choice is yours. The 550E gives you the control to make the necessary adjustments to fit your needs.		Bobbin Thread Sensor Every time you change the upper thread on the 550E, the bobbin sensor will monitor the remaining thread and let you know if you have enough to proceed to the section of your design. You can set the bobbin sensor too, so that you can decide when you want to receive the message.
Resume Mode Whether it’s the end of a long day of sewing and embroidery or a power outage, your 550E may be shut off in the middle of an embroidery design. No worries! As soon as you turn the machine back on, it will ask you if you want to resume your design and you’re all set to go again.		Advanced Needle Threader and Bright LED Lighting The one action superior needle threader made threading even more convenient than before. The 5 white LED Lighting in 3 locations brightens up the whole embroidery area, allowing you to see the stitches where you stop at.

Embroidery Editor Included

The accessories of MC550E are as follows:

1. Bobbin x 5 (1 set on the machine)
2. Screwdriver
3.Screwdriver key (for needle plate)
4. Lint brush
5. Scissors
6. Needle set
7. Spool holder(large) x 2(1 set on the machine)
8. Spool holder (small) x 2
9. Spool holder (special) x 2
10. Extra spool pin
11. Bobbin holder (1 set on the machine)
12. Special bobbin holder for Embroidery (high tension)
13. Touch panel stylus
14. Bobbin holder cleaner
15. Instruction book
16. Quick reference guide
17. Instructional DVD
18. Embroidery Editor CD-ROM
19. Embroidery Editor Installation guide
20. Soft cover
21. USB cable
22. Power cable
23. Embroidery Hoop SQ14B(With Template)
24. Embroidery Hoop RE20B(With Template)
25. Embroidery Hoop SQ20B(With Template)
26. Embroidery hoop RE36b (with template) and anti-slipping sticker
27. Anti-Slipping Sticker Clamp x 8
28. Extra Wide Table

Janome MC550E Brochure

Janome MC550E User's Guide

Complimentary dedicated 1 to 1 training of Janome Memory Craft 550E will be provided by Stitch4you(Ghim Soon)(+6588765598) trained,experienced and friendly sales consultants at our store. Our training should enable you to develop a deeper understanding of the machine and strengthen your confidence of handling it. Customers are expected to initiate arrangement of training sessions with Stitch4you team via our company whatsapp number +6588765598 or our Stitch4you Facebook Page. Arrangement of training sessions can also be made via phone calls on +6567489255.

Display sets are available at our store for customers to try too!

This machine's 2 Years warranty is covered by Ghim Soon Machinery Pte Ltd(+6588765598). 

By purchasing machines from Stitch4you(Ghim Soon), you are agreeable to abide to the terms and conditions of the warranty covered by Ghim Soon Machinery Pte Ltd spelt out as follow:

Ghim Soon Machinery Pte Ltd ("Ghim Soon") warrants this home sewing machine (the “Product”), excluding consumable parts (such
as plastic front panel, foot controller, needles, needle threader, thread cutter, all hooks (sewing machines and overlocker), bobbins, loopers, feed dogs, knife blades, seals (O-ring, etc), bulbs, lamps, LED light bulbs/strips, and belts) to the original purchaser to be free from defects in the materials or workmanship of the Product under normal use and service from the date of purchase of the Product by the original purchaser (i.e. date of conclusion of sales contract either orally or in writing), as follows:
1. for a limited warranty period of one year on light assembly, wiring, switches; and
2. for a limited warranty period of one year on all other parts.

The product must be unplugged from the power source when not in use.

Faulty parts which are replaced will remain as property of Ghim Soon. Serviced machines which are not collected within 2 months from the date of notification for collection will automically goes under the property of Ghim Soon.

If, at any time during the applicable limited warranty period, the Product is determined to be defective by Ghim Soon, Ghim Soon will replace or repair the Product, at Ghim Soon’s option.
The Product is warranted only for normal household non-commercial use. 
This limited warranty does not cover corrosion, rustings or stains, body or paintwork of machine, installation to wrong power supply, Act of Gods, service charges for checking improper installation/operation of machines,routine maintenance servicing,faulty display set or machine loan for commerical purposes, defects, damages and any kind whatsoever due to accidents, misuse/negligence, abuse, negligence, commercial use, or modification of, or to any part of the Product, or if the specifications supplied at the time of purchase with respect to proper maintenance and lubrication have not been observed or if the serial number affixed to the machine has been tampered with or defaced or if the original bill of sale, warranty certificate for the machine or other proof of purchase acceptable to Ghim Soon is not presented at the time service or repair is sought under this warranty.
This limited warranty shall be null and void unless the original purchaser (i) complies with any and all operating instructions in the manual provided or (ii) fails to have the Product periodically serviced and tuned by Ghim Soon in accordance with the service manual.
This limited warranty may only be used by the original purchaser of the Product. This limited warranty is not transferable to any subsequent purchaser, owner and/or any kind whoever, and Ghim Soon will take the responsibilities under this limited warranty only to the original purchaser and only the original purchaser may obtain service under this limited warranty.
Service under this warranty may only be obtained within Singapore where the original purchaser has purchased the Product.
GHIM SOON SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES AND LOSSES, OR DEFECT RESULTING FROM THE USE OF OTHERS THAN  AUTHENTIC PARTS AND THE REPAIR OF THE PRODUCT BY UNAUTHORISED SERVICE PERSONNEL.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE ORIGINAL PURCHASER.
GHIM SOON SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND INCLUDING INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING DIRECTLY OR INDIRECTLY FROM ANY BREACH OF THIS LIMITED WARRANTY.
THERE ARE NO EXPRESS AND IMPLIED WARRANTIES OTHER THAN THOSE DESCRIBED HEREIN. EXCEPT TO THE EXTENT PROSCRIBED BY THE APPLICABLE LAW, THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS HEREBY LIMITED TO THE DURATION OF THIS LIMITED WARRANTY.
To obtain limited warranty service the original purchaser must deliver or send the Product postage or freight pre-paid, to Ghim Soon along with (a) the original dated bill of sale issued by Ghim Soon to theoriginal purchaser, (b) a copy of this limited warranty, and, (c) a written short description of the defect. The original purchaser is strongly recommended to firstly contact Ghim Soon, if the original purchaser needs certain service under this limited warranty.
Ghim Soon is not responsible for any and all damages and losses that occur to the Product during transportation to or from the original purchaser.

For local purchases in Singapore, Ghim Soon is pleased to offer pick up services in which we will pick the machine up from designated locations,bring back to service thoroughly and deliver back to owner at a nominal fee of $30(includes GST). One way service will be chargeable at $20. These costs will not cover the servicing cost and cost of change of parts.

This warranty does not affect the statutory rights of the original purchaser under any applicable national laws in force nor the rights of the original purchaser against the dealer arising from their sales/purchase contract.
This limited warranty shall be interpreted, construed and enforced in all respects in accordance with the laws of Singapore.

Ghim Soon reserves the right to amend or modify the terms and conditions of this warranty without giving prior notice.